Vehicle-specific 13 pin/12N-12S CANbus Towing Kit with added caravan functions

TF2324 SmartCAN2 kit is a vehicle-specific 12N/12S CANbus-controlled trailer/caravan interface kit. It controls the trailer or caravan road lights and has caravan 12S functionality.

This kit has everything you need for a 13pin installation with CAN controlled caravan power and battery charging.

It is ideal for smart alternator vehicles.

When ordering, please check for module compatability on the list and specify the car you are fitting.

The list of compatible vehicles is below under More Information.

Please note if your vehicle is highlighted green on the compatability list then you will need a TX2303 Bootloader and an OBDII interface cable as well as the SmartCAN2 kit to complete the install.

  • Ref No: TF2324
  • Brand: Ryder
  • Delivery: UK Only
  • Unit of sale: Each
£178.50EX
VAT
Vehicle-specific 13 pin/12N-12S CANbus Towing Kit with added caravan functions
  • Dedicated and Multi-compatible
  • 12N and 12S: Operates the trailer lamps and the 12S caravan auxiliary functions
  • Either Read-only or Interactive depending on vehicle
  • CANbus Read only

The TF2323 SmartCan2 towing module connects directly to the vehicle's CANbus network. All the signal data to the towing module comes from a direct connection to the vehicle's CAN HI, CAN LO wires.

The SmartCAN2 module enables the activation of the vehicle's towing related functions When the vehicle requires data from the towing module to activate towing-related functions, the SmartCAN2 module sends it.

Some vehicles automatically accept data back from the unit and alter some functions when a trailer is connected. Some require a re-code before they do this and others react partially without a re-code, adding new functions when they have been re-coded.

Which vehicles will it fit?

The up-to-date list of compatible vehicles is here: Downloads - SmartCAN Data & Car Data | Ryder Towing Ltd

This module can be reprogrammed to fit other vehicles.

Although you would normally specify the vehicle you are fitting and receive the appropriate kit, the module can, in fact be reprogrammed to fit any compatible vehicle. This can be done very simply, manually or using a device called Boot Loader. Part number TX2303

 Click this link to see How to program a module.

12N/7pin kit 2m. with socket mounting plate and TF2218/7H Bypass
12N/7pin kit 2m. with socket mounting plate and TF2218/7H Bypass

12N plated bypass kit with TF2218/7H Smart Bypass and all connectors, cables and fuses for installation

Qty: Each
Ref: TF1018A
Brand: Ryder
£44.55EX
VAT
Parking distance sensor cut-out relay
Parking distance sensor cut-out relay

Fits in line in the rear parking distance sensor circuit and switches off the sensor buzzer when a trailer is connected. It is not usually suitable for vehicles with factory-fitted parking sensors (Typically, these have the buzzer under the dash)

Qty: Each
Ref: TFR1
Brand: Ryder
£11.73EX
VAT
Scotchlok type connector, non-3M blue
Scotchlok type connector, non-3M blue

Scotchlok type connectors non-3M Blue, for wires 1.1mm2 to 2.5mm2.

Qty: 500
Ref: TV209B
Brand: Ryder
£36.00EX
VAT
12N prewired socket without mounting plate5.0m cable
12N prewired socket without mounting plate5.0m cable

Trailer 7-pin lighting socket (12N) wired with 5m of 7-core cable without a mounting plate. With a rear seal.

Qty: Each
Ref: TF1205MUP
Brand: Ryder
£24.90EX
VAT
Double Micro2 FuseTap 15amp
Double Micro2 FuseTap 15amp

Double FuseTap Micro2 : New micro2-size, 15amp fuse-tap power pickup: piggy backs where there is an existing fuse or takes fused power from an empty chamber.

Qty: Each
Ref: TV1642D-5
Brand: Ryder
£4.00EX
VAT