Vehicle-specific 13 pin/12N-12S CANbus Towing Kit with added caravan functions

TF2324 SmartCAN2 kit is a vehicle-specific 12N/12S CANbus-controlled trailer/caravan interface kit. It controls the trailer or caravan road lights and has caravan 12S functionality.

This kit has everything you need for a 13pin installation with CAN controlled caravan power and battery charging.

It is ideal for smart alternator vehicles.

When ordering, please check for module compatability on the list and specify the car you are fitting.

The list of compatible vehicles is below under More Information.

Please note if your vehicle is highlighted green on the compatability list then you will need a TX2303 Bootloader and an OBDII interface cable as well as the SmartCAN2 kit to complete the install.

  • Ref No: TF2324
  • Brand: Ryder
  • Delivery: UK Only
  • Unit of sale: Each
£178.50EX
VAT
Vehicle-specific 13 pin/12N-12S CANbus Towing Kit with added caravan functions
  • Dedicated and Multi-compatible
  • 12N and 12S: Operates the trailer lamps and the 12S caravan auxiliary functions
  • Either Read-only or Interactive depending on vehicle
  • CANbus Read only

The TF2323 SmartCan2 towing module connects directly to the vehicle's CANbus network. All the signal data to the towing module comes from a direct connection to the vehicle's CAN HI, CAN LO wires.

The SmartCAN2 module enables the activation of the vehicle's towing related functions When the vehicle requires data from the towing module to activate towing-related functions, the SmartCAN2 module sends it.

Some vehicles automatically accept data back from the unit and alter some functions when a trailer is connected. Some require a re-code before they do this and others react partially without a re-code, adding new functions when they have been re-coded.

Which vehicles will it fit?

The up-to-date list of compatible vehicles is here: Downloads - SmartCAN Data & Car Data | Ryder Towing Ltd

This module can be reprogrammed to fit other vehicles.

Although you would normally specify the vehicle you are fitting and receive the appropriate kit, the module can, in fact be reprogrammed to fit any compatible vehicle. This can be done very simply, manually or using a device called Boot Loader. Part number TX2303

 Click this link to see How to program a module.

Double ATO FuseTap 15amp fuse tap
Double ATO FuseTap 15amp fuse tap

Double Fuse Tap ATO (standard) fuse tap 15amp power pickup: piggy backs where there is an existing fuse or takes fused power from an empty chamber

Qty: Each
Ref: TV1642D-2
Brand: Ryder
£3.66EX
VAT
Connectors, tab push-on, part insulated yellow 6.3mm
Connectors, tab push-on, part insulated yellow 6.3mm

6.3mm crimp-on male "spade" (blade) terminal. Yellow insulation over crimp section. Wire size 3.0mm2 to 6.0mm2.

Qty: 50
Ref: TV2396
Brand: Ryder
£5.70EX
VAT
Smart Logic 7-way Bypass with plug-in loom 1m, 12V to 12V and 24V to 12V
Smart Logic 7-way Bypass with plug-in loom 1m, 12V to 12V and 24V to 12V

Smart 7-way bypass module. Puts no load on the car's light circuits. Has a built-in buzzer. Compatible with most cars including PWM systems.

Can also be used as part of a 24V to 12V signal voltage dropper system.

The TF2218/7H, TF2218/7HS and TF2218/7HM replace every previous 7-way bypass, from TF1016 to TF2218/7E-P, including TF2219, TF2218U,

Qty: Each
Ref: TF2218-7H
Brand: Ryder
£25.99EX
VAT