Towing Relays & Monitors

Modern cars have complex lighting systems. Towbar wiring relays and modules are designed both to interface correctly with the vehicle's systems and to give the vehicle protection against any faults and overloads that could occur in the trailer wiring.

17-23 of 23
Switchmode Voltage Converter 24-12V, 12 amp

This device can be wired into a 24 volt vehicle to produce a controlled 12 volt output, up to 12 amps. It is used with a Smart 7-way bypass relay when a 24 volt vehicle is being equipped to tow a 12 volt trailer.

Ref: TF24510
Brand: Ryder
£128.25EX
VAT
Bridge Diode Unit

This unit is used on vehicles which have a switching pair of rear lights when the rear/boot door is opened, (Eg: Vauxhall Insignea Sports Tourer) and you dont want to fit a second relay.

this unit allows you to take both outputs to one relay by merging the signals without signal contamination.

Ref: TF2601
Brand: Ryder
£9.30EX
VAT
Fog Cut Out relay

This relay fits in line in the vehicle's rear fog light circuit and switches off the vehicle fog light(s) when a trailer is connected.

Ref: TFC2
Brand: Ryder
£11.68EX
VAT
Parking distance sensor cut-out relay

Fits in line in the rear parking distance sensor circuit and switches off the sensor buzzer when a trailer is connected. It is not usually suitable for vehicles with factory-fitted parking sensors (Typically, these have the buzzer under the dash)

Ref: TFR1
Brand: Ryder
£11.73EX
VAT
Mini buzzer 12 volt

Simple 12 volt buzzer with small fixing lugs and free wire leads approximately 100mm long. Buzzer measures approximately 23mm (L) x17mm(W) x 17mm (H)

Ref: TV1603
Brand: Ryder
£4.70EX
VAT
Mini buzzer 24 volt

Simple 24 volt buzzer with small fixing lugs and free wire leads approximately 100mm long. Buzzer measures approximately 23mm (L) x17mm(W) x 17mm (H)

Ref: TV160324V
Brand: Ryder
£5.20EX
VAT
Replacement loom 1000mm for TF2218/7H

Spare plug-in loom for TF2218/7H Smart bypass relay.

Ref: WT2705H
Brand: Ryder
£10.00EX
VAT