Recently Viewed
Recently ViewedFor caravans with a snap or magnetic type door retainer.
This add on pnumatic device alows you to release the caravan door from the anti-slam securing device without having to lean around or step outside.
(patent pending)
VAT
A simple ryder audible monitor for 24 volt systems that fits in-line in the yellow and green indicator wires of the 7-core trailer socket cable. It buzzes in time with the trailer indicator when a trailer is connected.
VAT
Wire to wire round crimp receptacle, half of a plug-in connection. Red, for 0.5mm2 to 1.5mm2 cable
VAT
Black steel mounting plate that is secured between the towball and the towbar. Will carry a 12N and a 12S socket one on each side of the towball.
VAT
Fuse Extender/Converter Mini to ATO/Standard 15amp power pickup extends out fuse connection by 29cm for easier access, and converts fuse type from Mini to ATO/Standard.
VAT
High quality crimper for easy and accurate fitting of un-insulated crimp connectors.
VAT
Trailer 7-pin auxiliary socket (12S) with rear seal, wired with 2m of grey 7-core cable, on a mounting plate.
VAT
13 pin unplated socket with TF2218/7H Smart Bypass and all connectors, cables and fuses needed for an installation.
VAT
Black steel mounting plate that is secured between the towball and the towbar. Will carry one 12N, 12S or 13-pin socket. Has a slot to allow the wired socket to be put in sideways rather than be threaded through the centre hole.
VAT
Trailer 13-pin lighting socket wired with a gasket seal 5m of 8-core cable, without a mounting plate, wired for lights only use.
VAT