7 pin In-line extension socket 12N

Small meter that attaches across the battery terminals and monitors the battery's condition.

A electronic depth gauge to quickly check tread depth on tires.

Trailer 13-pin lighting socket wired with a gasket seal 2m of 12-core cable, without a mounting plate.

12V LED towbar socket tester for 13pin sockets with a 7pin to 13pin socket adapter with self test function.

Ideal for testing bypass relay systems, limited testing on CANbus towing systems

(ONLY AVAILABLE ON PRE-ORDER)

5-7 working days lead time

FuseTap Micro3 fuse-tap 15amp power pickup: piggy backs where there is an existing fuse or takes fused power from an empty chamber.

Comes with 5 X 10A + 5 X 15A Micro3 fuse pack

Fits in line in the rear parking distance sensor circuit and switches off the sensor buzzer when a trailer is connected. It is not usually suitable for vehicles with factory-fitted parking sensors (Typically, these have the buzzer under the dash)

Smart 7-way bypass module. Puts no load on the car's light circuits. Has a built-in buzzer. Compatible with most cars including PWM systems.

Can also be used as part of a 24V to 12V signal voltage dropper system.

The TF2218/7H, TF2218/7HS and TF2218/7HM replace every previous 7-way bypass, from TF1016 to TF2218/7E-P, including TF2219, TF2218U,

13 pin trailer extension socket

A single relay for a single circuit with normally open and normally closed outputs - can be used both to switch on and to switch off. Coil current only 38mA.

Plastic 7 pin 12S free caravan auxiliary socket (tubular, unmounted with sealed cable entry) With cable support and screw terminals to accept the grey 7-core cable.