Rubber grommet to protect cable passing through a 1/2" (12mm) hole. For standard 7-core cable

Black single core automotive cable rated approximately 27.5 amps, 100m roll.

Cable ties 203mm x 2.5mm black

This short adapter plugs into a 7-pin socket and creates a 13-pin socket to accept a 13-pin plug.

Cable clips, made of a hard wearing Nylon, 25mm x 25mm base with 3M sticky fixing foam pads and a large clip to secure cable up to 10mm diameter. Bag of 100

This kit has 5 x TF2324 full function kits and a Bootloader for programing the kits, ideal for 1st time users as an instant starting kit to hit the ground running.

The TF2324 SmartCAN2 Kit is a vehicle-specific CANbus-controlled trailer interface fitting kit

This kit has everything you need for a 13pin installation to operate the trailer road lights and charging.

The online update tool (Bootloader) is an essential part of the SmartCAN2 system. Plug it into your computer, connect the SmartCAN2 module, select the correct vehicle and update. You have the matched module straight off your shelf and it’s only taken a couple of minutes.

When ordering, please specify the car you are fitting

The list of compatible vehicles is below, under More Information.

Please note if your vehicle is highlighted green on the compatability list then you will need a OBDII interface cable as well as the SmartCAN2 kit and Bootloader to complete the install.