Recently Viewed
Recently ViewedHigh quality crimper for easy and accurate fitting of un-insulated crimp connectors.
VAT
Trailer 7-pin auxiliary socket (12S) with rear seal, wired with 2m of grey 7-core cable, on a mounting plate.
VAT
13 pin unplated socket with TF2218/7H Smart Bypass and all connectors, cables and fuses needed for an installation.
VAT
Black steel mounting plate that is secured between the towball and the towbar. Will carry one 12N, 12S or 13-pin socket. Has a slot to allow the wired socket to be put in sideways rather than be threaded through the centre hole.
VAT
Trailer 13-pin lighting socket wired with a gasket seal 5m of 8-core cable, without a mounting plate, wired for lights only use.
VAT
A simple ryder audible trailer flasher monitor with longer wires, that fits in-line in the yellow and green indicator wires of the 7-core trailer socket cable. It buzzes in time with the trailer indicator when a trailer is connected.
VAT
Double FuseTap Micro2 : New micro2-size, 15amp fuse-tap power pickup: piggy backs where there is an existing fuse or takes fused power from an empty chamber.
VAT
TF2323 SmartCAN2 Kit is a vehicle-specific 12N CANbus-controlled trailer interface fitting kit
This kit has everything you need for a 13pin installation to operate the trailer road lights.
For caravan 12S power and split charging please use the TF2324 kit.
When ordering, please specify the car you are fitting
The list of compatible vehicles is below, under More Information.
VAT
A sturdy, shaped metal plate that fits between the towball and the towbar. Gives protection to the vehicle bumper against the coupling head during hitching and has a socket mounting place on each side.
VAT
A simple ryder audible trailer flasher monitor for pickups and vans: fits in-line in the indicator wires (green & yellow) of the socket cable. Buzzes in time with the indicator when a trailer is connected. 24V buzzer output via 4M cable for fitting closer to driver.
VAT