Car Data | Volkswagen Tiguan AWD 2008 -

SmartCAN and ByPass Relay towbar wiring instructions for an Volkswagen Tiguan AWD 2008 -

The boxes below show key fitting details Cable entry point, CAN connection details, etc. Alphanumeric references (e.g. A4) refer to the car map at to foot of the page .
Socket cable entry point M60 Grommet
Longer Cable Required? 2m
Power Source Fusebox.
Constant Live Colour
Fusebox/Battery Location B9
Add Fuse
Compatible SmartCAN Module/Kit TF2302, TF2352
CAN HI/LO Location B9 Control centre, Position G, Chambers 7+8
HI/LO Pins/Colours HI Orange/green, LO Orange/brown
Hard Brake Connection B9 Control centre
Is Data Two Way? Yes
Link to Recode Data VCDS Coding Guide for VAG vehicles
RECODE ADDS: C2 on dash; PDC; TSP; Auto hold brake adjustment

Wire colours and locations, use LED type probe to confirm correct wire in given location.

Notes Bumper: Disconnect plugs for rev sensor and rev light before removing bumper
Compatible ByPass Relay TF2218/7 Series
Other Appropriate Relay TF2302. Kit:TF2352
Lights Wire Colours Alternative Location Comment
LH Flasher Black/White - JL41 -
Fog Light Grey/Green - G29 -
RH Flasher Black/Green - JR45 -
RH Side Light Do not connect Brake & sides share one wire - -
Brake Light Black/Pink - JR45 -
LH Side Light Do not connect Brake & sides share one wire - -
Reverse Black/Blue - JR45 -
Wiring Diagram