Fitting Instructions for all 12S Kits and Relays

General Instructions for Wiring 12S Socket to a Vehicle (12 Volt Negative Earth)

Wire the socket as shown in Chart 'B'

Take the Grey 7-core (or 13-core) cable into the boot through a suitable entry point. Connect the inner wires of the cable into the vehicle circuits as shown in Chart 'B', being careful to use suitable gauge cables for any extensions. Some auxiliary circuits in caravans draw a lot of power so be careful to choose suitable sources in the vehicle and protect your circuits with fuses. Our 12S kits contain suitable cable and fuses.

CHART B

7-core cable colour
(13-pin in brackets)
Connect to Socket terminal No.
(13-pin in brackets)
Yellow
(PINK)
Reversing light and catch 1
(8)
Blue
(13-pin N/A)
Live feed aux battery 2
(13-pin N/A)
White
(WHITE/RED)
Earth 3
(13)
Green
(ORANGE)
Live feed interior lights* 4
(9)
Brown
(WHITE/BLUE or N/A)
Sensing Device Spare 5
(12 or N/A)
Red
(GREY)
Live feed fridge 6
(10)
Black
(WHITE/BLACK)
2nd Earth 7
(11)

* On caravans post 1996 this feed is automatically switched during towing by a relay in the caravan to charge the caravan battery. When this happens, other interior circuits are off (except the fridge).