Car Data | Volkswagen T6 Van 2014-

SmartCAN and ByPass Relay towbar wiring instructions for an Volkswagen T6 Van 2014-

Select:   
The boxes below show key fitting details Cable entry point, CAN connection details, etc. Alphanumeric references (e.g. A4) refer to the car map at to foot of the page .
Socket cable entry point -
Longer Cable Required? 2m
Power Source Fuse box
Constant Live Colour Loom to ignition switch
Fusebox/Battery Location
Add Fuse
Compatible SmartCAN Module/Kit TF2302/TF2352/TF2352VW
CAN HI/LO Location White connector over pedals
HI/LO Pins/Colours Orange/Brown, Orange/Green
Hard Brake Connection
Is Data Two Way? Yes
Link to Recode Data FCO, PDC, C2

Wire colours and locations, use LED type probe to confirm correct wire in given location.

Notes Wiring: Run the seven core down the right hand side. Put a grommet under the footwell plastic tray and route the cable under the plastic undertray.
Compatible ByPass Relay TF2218/7 Series
Other Appropriate Relay TF2302. Kit:TF2352
Lights Wire Colours Alternative Location Comment
LH Flasher Black - JL41 Not verified
Fog Light Black/Red - L51 Not verified
RH Flasher Black/Green - JR45 Not verified
RH Side Light Do not connect - - Not verified
Brake Light Black/Blue - - Not verified
LH Side Light Do not connect - - Not verified
Reverse Grey/White - - Not verified
Wiring Diagram