Car Data | Volkswagen Golf Vll 2011-

SmartCAN and ByPass Relay towbar wiring instructions for an Volkswagen Golf Vll 2011-

Select:   
The boxes below show key fitting details Cable entry point, CAN connection details, etc. Alphanumeric references (e.g. A4) refer to the car map at to foot of the page .
Socket cable entry point M60 Grommet
Longer Cable Required?
Power Source Fusebox.
Constant Live Colour
Fusebox/Battery Location B9
Add Fuse
Compatible SmartCAN Module/Kit TF2302, TF2352
CAN HI/LO Location B9 Control centre, Position G, Chambers 7+8
HI/LO Pins/Colours HI Orange/green, LO Orange/brown
Hard Brake Connection B9 Control centre
Is Data Two Way? Yes
Link to Recode Data VCDS Coding Guide for VAG vehicles
RECODE ADDS: C2 on dash; PDC; TSP; Auto hold brake adjustment

Wire colours and locations, use LED type probe to confirm correct wire in given location.

Notes Wiring: side light wires - 2 on either side. One either side carries brake signal (see colours below ). TF2218/7(S/P) essential. Replace lamp clusters before testing.
Compatible ByPass Relay TF2218/7 Series
Other Appropriate Relay TF2302. Kit:TF2352
Lights Wire Colours Alternative Location Comment
LH Flasher Black/White - - -
Fog Light White Grey/White L50 -
RH Flasher Black/Green - - -
RH Side Light Grey/Yellow Black/Red - -
Brake Light Black/Purple - - -
LH Side Light Grey/Black - - -
Reverse Black/Blue - L50 -
Wiring Diagram