Car Data | Vauxhall/Opel Zafira MPV 2005 -

SmartCAN and ByPass Relay towbar wiring instructions for an Vauxhall/Opel Zafira MPV 2005 -

Select:   
The boxes below show key fitting details Cable entry point, CAN connection details, etc. Alphanumeric references (e.g. A4) refer to the car map at to foot of the page .
Socket cable entry point M58 Grommet
Longer Cable Required?
Power Source Fusebox.
Constant Live Colour
Fusebox/Battery Location C10 or C11
Add Fuse
Compatible SmartCAN Module/Kit TF2302GM, TF2353
CAN HI/LO Location OBDII D15/O24
HI/LO Pins/Colours Pins 1 & 4
Hard Brake Connection N/A
Is Data Two Way? N/A
Link to Recode Data Recoding not required
Use TF2302GM GM-specific SmartCAN module. Single wire CAN

Wire colours and locations, use LED type probe to confirm correct wire in given location.

Notes Brakes alternative: Wire to high level brake light: Black/yellow wire in connector block above fusebox at JL44. Connect side light signal wires to number plate light lead, grey/green, same connector. Lights may stay on when tailgate is raised.
Compatible ByPass Relay TF2218/7 Series
Other Appropriate Relay TF2302GM. Kit:TF2353
Lights Wire Colours Alternative Location Comment
LH Flasher Blue/White - - -
Fog Light Blue/Black - - -
RH Flasher Green/Black - - -
RH Side Light Grey/Green - JL44 See Notes
Brake Light Black/Yellow - JL44 See Notes
LH Side Light Grey/Green - JL44 See Notes
Reverse White/Black - - -
Wiring Diagram