Car Data | Saab 9.5 2010+

SmartCAN and ByPass Relay towbar wiring instructions for an Saab 9.5 2010+

Select:   
The boxes below show key fitting details Cable entry point, CAN connection details, etc. Alphanumeric references (e.g. A4) refer to the car map at to foot of the page .
Socket cable entry point I38 Grommet
Longer Cable Required?
Power Source Fusebox.
Constant Live Colour
Fusebox/Battery Location C10 or C11
Add Fuse
Compatible SmartCAN Module/Kit TF2302GM, TF2353
CAN HI/LO Location OBDII C10/C11 or black/red JL43
HI/LO Pins/Colours HI Pin1 Green/ LO Pin4 Black or HI to Black/Red @JL43,
Hard Brake Connection N/A
Is Data Two Way? Yes
Link to Recode Data Recoding not required
Use TF2302GM GM-specific SmartCAN module. Single wire CAN

Wire colours and locations, use LED type probe to confirm correct wire in given location.

Notes -
Compatible ByPass Relay TF2218/7 Series
Other Appropriate Relay TF2302GM. Kit:TF2353
Lights Wire Colours Alternative Location Comment
LH Flasher Blue/White - JL41 -
Fog Light Yellow/grey - JL41 In pillar
RH Flasher Blue/Purple - JR45 -
RH Side Light Purple/grey - JL41 -
Brake Light Green/White - JL41 -
LH Side Light Purple/grey - JL41 -
Reverse Grey/Green - JL41 -
Wiring Diagram

Saab

Call Us