Car Data | Mazda 2 All 2003 -

SmartCAN and ByPass Relay towbar wiring instructions for an Mazda 2 All 2003 -

Select:   
The boxes below show key fitting details Cable entry point, CAN connection details, etc. Alphanumeric references (e.g. A4) refer to the car map at to foot of the page .
Socket cable entry point M60 Grommet
Longer Cable Required? 2m
Power Source Fusebox
Constant Live Colour
Fusebox/Battery Location B7/B9
Add Fuse
Compatible SmartCAN Module/Kit TF2302, TF2352
CAN HI/LO Location B7 or B9
HI/LO Pins/Colours HI Orange/green, LO Orange/brown
Hard Brake Connection N/A
Is Data Two Way? Yes
Link to Recode Data VCDS Coding Guide for VAG vehicles
RECODE ADDS: C2 on dash; PDC; TSP; Auto hold brake
Likely to display "ECS recode" when module installs. Recode to clear

Wire colours and locations, use LED type probe to confirm correct wire in given location.

Notes A1 2014 has supplementary lights when hatch is open. Bypass not suitable
Compatible ByPass Relay TF2218/7 Series
Other Appropriate Relay TF2302. Kit:TF2352
Lights Wire Colours Alternative Location Comment
LH Flasher Black/White - - -
Fog Light Grey/White - - -
RH Flasher Black/Green - - -
RH Side Light Grey/Blue - - -
Brake Light Green/Yellow - - -
LH Side Light Black/Blue - - -
Wiring Diagram