Car Data | Landrover Freelander II 4WD 2007 -

SmartCAN and ByPass Relay towbar wiring instructions for an Landrover Freelander II 4WD 2007 -

Select:   
The boxes below show key fitting details Cable entry point, CAN connection details, etc. Alphanumeric references (e.g. A4) refer to the car map at to foot of the page .
Socket cable entry point I38 Grommet
Longer Cable Required?
Power Source Fusebox
Constant Live Colour
Fusebox/Battery Location I35/JL42
Add Fuse
Compatible SmartCAN Module/Kit TF2302, TF2351
CAN HI/LO Location I35/38 on Multiplug
HI/LO Pins/Colours Grey/orange, Purple/orange
Hard Brake Connection JL42 Purple/brown wire
Is Data Two Way? Yes
Link to Recode Data Recoding data for non-VAG vehicles
Recoding adds C2 on dash; PDC; FCO Recoding adds C2 on dash; PDC or use pink (0V) for C2

Wire colours and locations, use LED type probe to confirm correct wire in given location.

Notes Fuse in chamber FA11 makes blue wire live
Compatible ByPass Relay TF2218/7 Series
Other Appropriate Relay TF2302. Kit:TF2351
Lights Wire Colours Alternative Location Comment
LH Flasher Grey/Orange - JL41 -
Fog Light Green/Brown - JL41 -
RH Flasher Green/Orange - JL41 -
RH Side Light White/Orange Grey/Brown JL41 -
Brake Light Purple/Brown - JL41 -
LH Side Light Green/Purple Orange/White JL41 -
Reverse Green/White - JL41 -
Wiring Diagram