Car Data | Chrysler Voyager and Grand Voyager MPV Mar 2001 -

SmartCAN and ByPass Relay towbar wiring instructions for an Chrysler Voyager and Grand Voyager MPV Mar 2001 -

Select:   
The boxes below show key fitting details Cable entry point, CAN connection details, etc. Alphanumeric references (e.g. A4) refer to the car map at to foot of the page .
Socket cable entry point I39 Grommet
Longer Cable Required? 2m
Power Source Battery
Constant Live Colour
Fusebox/Battery Location O14
Add Fuse
Compatible SmartCAN Module/Kit N/A
CAN HI/LO Location N/A
HI/LO Pins/Colours N/A
Hard Brake Connection N/A
Is Data Two Way? n/a
Link to Recode Data N/A

Wire colours and locations, use LED type probe to confirm correct wire in given location.

Notes Negative fog: use TF1011 to earth switch it. (See Practical Guide) Take power from sidelight or fog will stay on.
Compatible ByPass Relay TF1011 for neg-switched fog light
Other Appropriate Relay -
Lights Wire Colours Alternative Location Comment
LH Flasher White/Green - - -
Fog Light White/Yellow - - Negative - see note
RH Flasher White/Brown - - -
RH Side Light White/Orange - - -
Brake Light White/Brown - - -
LH Side Light White/Brown - - -
Reverse Green/White - - -
Wiring Diagram