Car Data | BMW X1 SUV 2009 -

SmartCAN and ByPass Relay towbar wiring instructions for an BMW X1 SUV 2009 -

Select:   
The boxes below show key fitting details Cable entry point, CAN connection details, etc. Alphanumeric references (e.g. A4) refer to the car map at to foot of the page .
Socket cable entry point M60
Longer Cable Required? 2m
Power Source Powerpoint at M59
Constant Live Colour
Fusebox/Battery Location JR45
Add Fuse
Compatible SmartCAN Module/Kit TF2302, TF2352
CAN HI/LO Location JR47 or B9 plug above brake pedal
HI/LO Pins/Colours HI Orange/green, LO Green
Hard Brake Connection N/A
Is Data Two Way? Yes
Link to Recode Data N/A
Functions added automatically: C2 on dash; PDC; FCO

Wire colours and locations, use LED type probe to confirm correct wire in given location.

Notes Wiring: Brake & side lights share one wire. Connect red wire only from relay to run both circuits. Do not connect thin brown or black. All lamps will work corrrectly.
Compatible ByPass Relay TF2218/7 Series
Other Appropriate Relay TF2302. Kit:TF2351
Lights Wire Colours Alternative Location Comment
LH Flasher Blue/Green - JL41 -
Fog Light Green/Red Green/Yellow JL43 -
RH Flasher Blue/Brown - JL43 -
RH Side Light - Do not connect JL43 Do not connect
Brake Light Grey/Yellow - JL43 -
LH Side Light - Do not connect JL41 Do not connect
Reverse Black/Blue - JL43 -
Wiring Diagram