Towbar Wiring | Pre-wired towing sockets
Prewired sockets are a vital part of every fitting.
Look for the Highest Quality!
They should be of the highest quality with good cable, quality sockets and durable mounting plates.
- Ryder prewired towbar sockets are factory made and subjected to rigorous quality control.
- We use wire that is thick enough to do the job and we will not compromise on this
- We wire standard sockets with 2 metres of cable, long enough to fit easily on the vast majority of vehicles
- 1.6 metre versions, preferred by many fitters, are a standard option
- Other lengths (e.g. 3 or 5 metres for some 4x4s, vans and pickups) are listed in our catalogue.
- Our black, phenolic-coated plates are virtually rustproof
Unplated - Very Cost Effective
Pre-wired sockets fully wired, with seals but without plates are ideal for many current tow bars. They are available in 1.6 metre, 2 metre, 3 metre and 5 metre lengths as standard and in other lengths to order.
Thin wall cable: Best for quality and efficiency.
The improved material used in modern thin-walled cables allows more heat to escape from the copper conductors. This means that the conductors can cool more easily. As a result, a thin wall cable of a particular cross-section area can carry slightly more current than the same conductor in the old thicker wall cable.