TF2005T Front monitor Audible Monitor

For vehicles where flasher relay is not easy to reach
The TF2005  has a built in buzzer and incorporates the same monitoring circuits as all the other devices in the 2000 series. It is designed to be wired rather than plugged in and are, therefore, suitable for vehicles where the flasher relay is not accessible.

The monitor fits in the front of the vehicle somewhere fairly close to the flasher relay, and is designed to be wired in line on the input side of the flasher relay (in the line from the battery to flasher relay pin 49 or equivalent.)

TF2005T

Refer to the General Instructions and Chart A in the section 12N Wiring before following these instructions
The TF2005T has three connecting wires:
Orange connects to the line from the battery
Grey connects to flasher pin 49 or to the wire to that pin (or equivalent)
White connects to a good earth on the chassis of the vehicle.