TF2004 Front monitor

For vehicles where flasher relay is not easy to reach
The TF2004  has a pink tell-tale output wire that has to be connected to an earthed buzzer or panel lamp and incorporate the same monitoring circuits as all the other devices in the 2000 series. It is designed to be wired rather than plugged in and are, therefore, suitable for vehicles where the flasher relay is not accessible.

The monitor fits in the front of the vehicle somewhere fairly close to the flasher relay, and is designed to be wired in line on the input side of the flasher relay (in the line from the battery to flasher relay pin 49 or equivalent.)

Refer to the General Instructions and Chart A in the section 12N Wiring before following these instructions
The TF2004 has four connecting wires:
Orange connects to the line from the battery
Grey connects to flasher pin 49 or to the wire to that pin (or equivalent)
Pink connects to a panel lamp or buzzer which has its other pole connected to earth.
White connects to a good earth on the chassis of the vehicle.