TF2415FL  Audible Monitor 24V with flying lead

This is a special version of the TF115. It is fitted with a 4 metre twin flying lead, connected where the buzzer's positive lead would normally be connected, and supplied with a separate buzzer which can be connected to the flying lead.
In all other respects its function and operation are the same as the TF115.

It is fitted in vehicles where the buzzer has to be remote from the monitoring circuits. A example would be in a pickup. The monitor would be installed close to the rear lamps of the pickup whilst the buzzer, to be audible to the driver, would be placed in the cab.
A panel lamp or similar device can be connected in place of the buzzer if required.

Instructions: Top
Refer to the General Instructions and Chart A in the section 12N Wiring before following these instructions.
Socket
Pin No.		 7-core cable
colour		  to  Relay wire
colour or
terminal No.		 Relay wire
colour or
terminal No.		  to  Vehicle Circuit
1 Yellow to Yellow Yellow/White to LH Flasher
2 Blue to Direct Direct to Fog Lamp
3 White to Chassis White to Chassis earth
4 Green to Green Green/White to RH Flasher
5 Brown to Direct Direct * to RH tail light
6 Red to Direct Direct * to Brake Lights
7 Black to Direct Direct * to LH tail light
- - - - Twin to Remote Buzzer